Installing a dishwasher seems simple, but if you want to do it yourself, you must have some plumbing knowledge to avoid problems. It’s better to seek professional help as these problems could harm your home and/or kitchen.
Installing a dishwasher in Sydney might raise a common question: How much does it cost to install a dishwasher? This is because you will have to bear a high cost for dishwasher installation if you choose the wrong plumber. Therefore, knowing the cost of installing a dishwasher in Sydney is crucial.
Simple dishwasher installations are cheap. You might spend $500 or less. For more complex installations, prices rise above $5000.
In this blog, we’ll take you through the prices of dishwashers, do-it-yourself installations, and how to know if you need a new installation.
The Types of Dishwashers
Here are the different types of dishwashers you can purchase:
1. Freestanding Dishwasher
$400 to $2000
Freestanding washers are connected to your kitchen tap and drain into your sink.
2. Benchtop Dishwasher
$250 to $1000
These are dishwashers installed on the counter.
3. Built-In Dishwasher
$1500-$2100
This dishwasher is installed under your kitchen countertops and is connected to your home’s plumbing.
4. Semi-Integrated Dishwasher
$900-$4000
These are dishwashers with an exposed control panel, unlike fully integrated dishwashers.
5. Fully-integrated Dishwasher
$800-$5500
This type of dishwasher is installed behind a cabinet. They blend seamlessly into your kitchen layout.
Signs Your Dishwasher Needs Replacing
Do you need a plumber to install a dishwasher or not? Here are signs indicating whether your dishwasher needs a replacement:
- Age: Experts recommend replacing if your dishwasher is 10 years or older. Also, outdated appliances are inefficient and tend to clog up your pipes.
- Rust: A small rust spot here and there isn’t a cause for alarm. However, when you see rust inside your dishwasher, it’s time to install a new one. Rust can contaminate your dishes and lead to water leakage.
- Water Retention: When your dishwasher pools at the bottom, you need to replace it. It means there’s a drain issue.
- Broken Latch: A broken lock prevents a dishwasher from cleaning utensils. Before you buy a replacement, check whether repairs are possible.
- Cracks: Whether through wear and tear or damage from a utensil, a cracked dishwasher leads to water damage.
- Dishes Remain Dirty: Your dishwasher needs replacement if your dishes remain dirty after ruling out soap, incorrect dish placement, and caked-on food.
How to Install a Dishwasher: DIY
If you know how to install a dishwasher yourself, you will no longer be asked, “Do you need a plumber to install your dishwasher”.
Here’s how you can install your dishwasher:
- Check your new dishwasher. It should have no scratches or dents, and check that it came with a warranty and manual.
- Turn off the water supply and electricity in the room.
- Cover the floor with a cover sheet. This is to protect your floor and to make clean-up easier.
- If you already have a dishwasher, turn it off and disconnect its water hose, electrical head, and waste hose. Now, remove it.
- Clean where you plan to put the new dishwasher.
- Put the dishwasher close to where it will go. You need some space to connect it again, but the cable and hoses should have some slack.
- Once it’s in place, reconnect the water and electricity supply. Tip: Hand-tighten the water hose to the isolation valve.
- Connect the waste hose. Loop the waste hose in an upside-down ‘U’ to avoid siphonage. Hang the waste hose high and clamp it in place with the clamper provided with the dishwasher.
- Slide the dishwasher in its final position.
- Turn on the water and electricity.
- Run a full cycle and observe the machine. In particular, watch out for leaks.
How to Choose the Right Plumber: Expert Tips
Choosing the right plumber to install a dishwasher doesn’t have to be stressful. Here are some tips for choosing one:
- Ask for your plumber’s qualifications.
- Combine dishwasher repairs and installations with other plumbing repairs like leaky faucets and clogged toilets.
- When purchasing a dishwasher, ask the company whether they do dishwasher installation.
- Look for sales and discounts.
- Read reviews of the dishwasher brand.
- Conduct cost comparisons with rival plumbing companies.
- Ask plenty of questions about how they connect dishwashers.
- Ask your plumber if they offer insurance to cover property damage.
- Check reviews and estimates from homeowners.
- Research the plumber and the company.
How Much Does It Cost to Install a Dishwasher?
Below is the price breakdown for dishwasher installation:
- Dishwasher removal: $60-$140
- Electrical supply connection: $140-$180
- Flat-pack cabinet installation: $50-$75 per hour
- Water supply connection: $500-$1500
- Call-out fee: $60-$100
- Water and drain line connection: $500-$1500
- Dishwasher: $250-$5500
Conclusion
Installing a dishwasher in Sydney requires careful consideration. While DIY installation might seem cost-effective, it requires plumbing knowledge. With this, you can protect your home. Dishwasher installation costs vary. Simple installations can be under $500, but complex ones may exceed $5000. Furthermore, look for signs like age, rust, water retention, broken latches, cracks, or dirty dishes. Ultimately, if unsure about DIY installation, hiring a qualified plumber is safer. This ensures a proper installation, preventing future issues. At Jeremy’s Plumbing, we are more than capable of installing your new dishwasher with ease. Contact us to book a service!
